Floating Fish Feed Dryer
Fish feed dryer also known as pellet extruding drying machine, are used for feed dryer, which can ensure the fish feed pellets quality and benefit the storage of fish feed.The belt dryer is a drying device that uses a steel mesh as a conveyor belt to carry out continuous drying.The fish feed pellet mesh belt dryer machine are used for drying the high moisture material to a suitable moisture, so that the material can be reached a high efficient use value
Application
Feed dryers are suitable for drying in many industries and various materials, such as food, vegetables, feed, chemical raw materials, decorative materials, and medicinal materials.
Characteristics
High-efficiency and energy saving
Easy to install and maintain
Fast drying speed, high evaporation intensity
Convenient drying parameters adjustment, flexible operation, wide adaptationHigher work capacity, the range of drying time is adjustable
Standardized production, users can increase the number of segments according to production
Advantages
1. The air volume, heating temperature, residence time and feed rate can be adjusted to achieve the best drying effect.
2. It is often used in applications where the drying speed is low and the drying time is long.
3. Unique air distribution device to evenly distribute hot air
4. The particles are not subjected to vibration or impact during the drying process, and the particles are not easily broken.
5. Wide application range, simple operation and convenient maintenance.
6. The equipment adopts the control motor. According to the water content of the material, the time of the material is adjusted during the operation of the dryer to ensure the drying efficiency.
Parameter
Model | DZ-D50 | DZ-D100 | DZ-D150 | DZ-D200 | DZ-D300 | DZ-D500 | DZ-D1000 |
Power | 8KW | 10KW | 15KW | 20KW | 28KW | 45KW | 70KW |
Capacity | 50kg | 100kg | 150kg | 200kg | 300kg | 500kg | 1000kg |
Size(m) | 3*1.1*0.8 | 5*1.1*0.8 | 3.2*1.2*1.55 | 3*1.1*1.3 | 5*1.2*1.3 | 7*1.1*2 | 12*1.2*2 |
Working principle
The material is placed on the conveyor belt, through the switch-plate device on the conveyor belt, spread the belt evenly, the material through the first layer transition to the next layer, each layer set guide material device and rollover device. make the material fully contact with the heating medium, dried material will be discharge by the last layer.
The heating medium enter into the dryer machine by the fan, wind speed induced draft fan generated pressure to make adequate and uniform spread in the dryer at the bottom of the heating medium, since the lower pressure is greater than the above pressure,the upward movement of the heating medium through each belt, so that the material in contact with the heat medium sufficiently, improve drying efficiency.
Reply comment