Small pellet cooler is usually used in small pellet mill plant, as a support machinery to flat die pellet mill. It can improve the molding effect, hardness, surface smoothness of feed pellets.

Application

Pellet cooler is to cool down the fresh & hot pellets from pellet mill. The pellets just from the pellet mill with 70-85℃, so the pellets need to be cooled till near room temperature to meet the storage requirement otherwise they will result in mildew. 

It occupies small areas. It is convenient to transport and install and easy to dismount and adjust. The air consuming is low but the cooling efficiency is good. 

Performance

Combine Cooler and Sieve is base on the drum of Rotary Sieve which is made up of

Drum Sieve and Frame. There is one certain degree between the Rotary Drum Sieve

and ground. The outside of the Sieve is covered by closed steel to reduce the noisy

pollution. On the adjustable speed system, the drum sieve is rotating on certain speed;

the pellet is separated and cooled from top to bottom on the rotating of Drum Sieve. The

fine powder is discharged from the front of Drum Sieve, and the good pellet is outlet

from the back of Drum Sieve. During the cooling and sieving process, the rotating is

evenly, low impulsion and vibrating, and stable. The installation of Combined Cooler

and Sieve is easy which can be directly put on the ground, floor board or under the

storage. This machine is easy to closely collect dust and maintain.

Parameters

Features

Simple structure, easy operation and maintenance.

Low noise, little dust emission

Small size, covering a small area.

Low consumption, but high sieving rate.

Sieving hole is not easy to be blocked, ensuring longer life time.